View CDQ6004-QS_463832.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Features
Matched Pair of Amplifiers for Optimum Balanced Design 0.25 to 3GHz Frequency Range 44 dBm Output IP3 (Balanced configuration) 41 dBm Output IP3 (Single-ended configuration) 15 dB Gain 23 dBm P1dBm 2.1dB Noise Figure RoHS Compliant 4X4 QFN Package Singale Positive Supply +3V to +5V Voltage Rail
General Description
The CDQ6004-QS is a dual high dynamic range amplifier designed for applications operation within the 0.25 to 3GHz frequency range. Co-located matched amplifiers are assembled in the 4mm X 4mm QFN package. The low-cost, surface-mount, 16 terminal, plastic package is RoHS compliant. The CDQ6004-QS is an ideal solution for implementing balanced or push-pull designs. The amplifier can also be used for dual-band operation where single-ended design is used for each band. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of low NF and high IP3 at the same bias point make it an ideal transmit or receive solution when used in applications including CATV operating from 50 to 850 MHz, cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN) operation at 2.4 GHz. All devices are 100% RF and DC tested.
Absolute Maximum Ratings
Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature Thermal Resistance
+6.0 V +20 dBm -55 C to +125 C 150 C -40 C to +85C 52 C/W
Operation of this device above any of these parameters may cause damage.
Typical Parameters
Parameter
Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Noise Figure Output P1dB
0.9 16.5 -13 -16 42 2.1 +23
Typical
2 15 -11 -12 41 2.1 +23 2.4 14.9 -20 -11 40.5 2.6 +24
Units
GHz dB dB dB dBm dB dBm
Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture.
Electrical Characteristics (T = 25C)
Parameter Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Noise Figure Output P1dB Operating Current Range Supply Voltage Condition Externally Matched Externally Matched Externally Matched
Typical values reflect performance in recommended application circuit @ +5V.
Units GHz dB dB dB dBm dB dBm mA V
Min. 0.25 13.5
Typ. 15 -10 -10 41 2.1 23 150 5.0
Max. 3.0
38
120
180
Notes: 1. T = 25C, Frequency = 2 GHz, 50 Ohm system. 2. Each single ended amplifier is tested separately. 3. OIP3 is measured with two tones at output power of 5 dBm/tone separated by 10 MHz. 4. Slight performance degredation is expected over temperature.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Typical Device S-Parameters
CDQ6004-QS S21 Vs Voltage
19 18 17 16 15 14 13 12 11 S21 3V S21 4V S21 5V
CDQ6004-QS S12 Vs Voltage
0
-5 S12 3V S12 4V S12 5V
-10
(dB)
10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10
(dB)
-15
-20
-25
-30 0 1 2 3 4 5 6 7 8 9 10
Frequency (GHz)
Frequency (GHz)
CDQ6004-QS S22 Vs Voltage
20 18 16 14 12 10 8 6 4 2 S22 3V S22 4V S22 5V
CDQ6004-QS S11 Vs Voltage
10 9 8 7 6 5 4 3 2 1 S11 3V S11 4V S11 5V
(dB)
-2 -4 -6 -8 -10 -12 -14 -16 -18 -20 0 1 2 3 4 5 6 7 8 9 10
(dB)
0
0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 0 1 2 3 4 5 6 7 8 9 10
Frequency (GHz)
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Application Circuit @ 900 MHz Schematic: Typical Performance:
CDQ6004-QS Evalua tio n B o ard @ 900MHz VD=5 V
20 15 15
Gain
10 5 0 -5 - 10 - 15 -2 0 0 0.5 1 F re q u e n c y ( G H z ) -5 5
Input Return Loss
- 15
Output Return Loss
1. 5 2
-2 5
Parameter
Typical
0.9 16.5 -13 -16 42 2.1 23
Units
GHz dB dB dB dBm dB dBm
Board Layout:
Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Noise Figure Output P1dB
Components
Ref Designator C2, C4, C6, C8 C1, C5 C3, C7 L1, L2 L3, L4
Value 2.7 pf 1.5 pf 1000 pf 47 nH 6.8 nH Size 0402 0603 0805 0805 0603
* Material: FR4, 28 mil * Plating: 1.5 oz. Copper both sides
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Typical Performance @ 900 MHz (50 Ohm system over voltage)
CDQ6004-QS Evaluation Board @ 0.9GHz Gain Over Voltage
CDQ6004-QS Evaluation Board @ 0.9GHz Input Return Loss (S11) Over Voltage
20 18 16 14 12 10 8 6 4 2 0 0 0.5 1 1.5 2 2.5 3
Return Loss (dB)
Vd=2V Vd=4V
Vd=3V Vd=5V
0 -5 -10 -15 -20 -25
Vd=2V Vd=4V Vd=3V Vd=5V
Gain (dB)
3.5
4
4.5
5
5.5
6
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
Frequency (GHz)
Frequency (GHz)
CDQ6004-QS Evaluation Board @ 0.9GHz Output Return Loss (S22) Over Voltage
CDQ6004-QS Evaluation Board @ 900MHz P1dB Over Voltage 26 24
P1dB (dBm)
Return Loss (dB)
0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz)
Vd=2V Vd=4V Vd=3V Vd=5V
22 20 18 16 14 12 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
CDQ6004-QS Evaluation Board @ 900MHz OIP3 Over Voltage 44 42 40 38 36 34 32 30 28 26 24 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
2.4 2.2
NF(dB)
CDQ6004-QS Evaluation Board @ 900MHz Noise Figure Over Voltage
OIP3 (dBm)
2.0 1.8 1.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Application Circuit @ 1.9 GHz ~ 2.1 GHz: Schematic: Typical Performance:
CDQ6 004-QS Evalua tio n B o ard @ 1.9GHz 2.1GHz VD=5 V
20 15 15
Gain
10 5 0 -5 - 10 - 15 -2 0 0 0 .5 1 1.5 F re q u e n c y ( G H z ) 2 - 15 5
Input Return Loss
-5
Output Return Loss
2 .5 3
-2 5
Parameter
Typical
1.9 15.3 -11.9 -16.3 41 2.1 23 2.1 15.0 -12.5 -13.6 41.3 2.1 23
Units
GHz dB dB dB dBm dB dBm
Board Layout:
Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Noise Figure Output P1dB
Components
Ref Designator C2, C4, C6, C8 C1, C5 C3, C7 L1, L2
Value 100 pf 1.5 pf 1000 pf 47 nH Size 0402 0603 0805 0805
* Material: FR4, 28 mil * Plating: 1.5 oz. Copper both sides
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Typical Performance @ 1.9 GHz (50 Ohm system over voltage)
CDQ6004-QS Evaluation Board @ 1.9 ~ 2.1 Gain Over Voltage 20 18 16 14 12 10 8 6 4 2 0 0 0.5 1 1.5 2 2.5 3 Vd=2V Vd=4V Vd=3V Vd=5V
Return Loss (dB)
CDQ6004-QS Evaluation Board @ 1.9~2.1GHz Input Return Loss (S11) Over Voltage
0 -5 -10 -15 -20 -25 Vd=2V Vd=4V Vd=3V Vd=5V 4.5 5 5.5 6
Gain (dB)
3.5
4
4.5
5
5.5
6
0
0.5
1
1.5
2
2.5
3
3.5
4
Frequency (GHz)
Frequency (GHz)
CDQ6004-QS Evaluation Board @ 1.9~2.1GHz Output Return Loss (S22) Over Voltage
CDQ6004-QS Evaluation Board@1.9GHz P1dB Over Voltage 26 24
P1dB (dBm)
Return Loss (dB)
0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz)
Vd=2V Vd=4V Vd=3V Vd=5V
22 20 18 16 14 12 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
CDQ6004-QS Evaluation Board @ 1.9GHz OIP3 Over Voltage 44 42 40 38 36 34 32 30 28 26 24 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
2.4 2.2
NF (dB)
CDQ6004-QS Evaluation Board @ 1.9GHz Noise Figure Over Voltage
OIP3(dBm)
2.0 1.8 1.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Application Circuit @ 2.4 GHz: Schematic: Typical Performance:
CDQ6 0 0 4 -QS Eva lua tio n B o a rd @ 2.4 GHz VD=5V
20 15 10 5 15
Gain Input Return Loss
5
0 -5 - 10 - 15 -2 0 0 0 .5 1 1.5 2 2 .5 3 3 .5 F re q u e n c y ( G H z )
-5
Output Return Loss
- 15
-2 5
Parameter
Typical
2.4 14.9 -20 -11 40.5 2.6 24
Units
GHz dB dB dB dBm dB dBm
Board Layout:
Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Noise Figure Output P1dB
Components
Ref Designator C2, C4, C6, C8 C1, C5 C3, C7 L1, L2
Value 2.7 pf 1.2 pf 1000 pf 47 nH Size 0402 0603 0805 0805
* Material: FR4, 28 mil * Plating: 1.5 oz. Copper both sides
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 7 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Typical Performance @ 2.4 GHz (50 Ohm system over voltage)
CDQ6004-QS Evaluation Board @ 2.4GHz Gain Over Voltage
CDQ6004-QS Evaluation Board @ 2.4GHz Input Return Loss (S11) Over Voltage
20 18 16 14 12 10 8 6 4 2 0 0 0.5 1 1.5 2 2.5 3
Return Loss (dB)
Vd=2V Vd=4V
Vd=3V Vd=5V
0 -5 -10 -15 -20 -25
Vd=2V Vd=4V Vd=3V Vd=5V
Gain (dB)
3.5
4
4.5
5
5.5
6
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
Frequency (GHz)
Frequency (GHz)
CDQ6004-QS Evaluation Board @ 2.4GHz Output Return Loss (S22) Over Voltage
CDQ6004-QS Evaluation Board @ 2.4GHz P1dB Over Voltage 26
Output P1dB(dBm)
Return Loss (dB)
0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Frequency (GHz)
Vd=2V Vd=4V Vd=3V Vd=5V
24 22 20 18 16 14 12 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
CDQ6004-QS Evaluation Board @ 2.4GHz OIP3 Over Voltage 48 46 44 42 40 38 36 34 32 30 28 26 24 22 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
2.8 2.6
NF(dB)
CDQ6004-QS Evaluation Board @ 2.4GHz Noise Figure Over Voltage
OIP3(dBm)
2.4 2.2 2.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Drain Voltage (V)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS Pin Out Detail
Pin
5 8 16 13 1,2,3,4 9,10,11,12 6,7,14,15
Functional Block Diagram
Function Description
IN 1 IN 2 OUT 1 OUT 2 VS 1 VS 2 GND Amplifier 1 RF Input Amplifier 2 RF Input Amplifier 1 RF Output Amplifier 2 RF Output Amplifier 1 Source Connection Amplifier 2 Source Connection Main Heat-Sinking Connection
Physical Dimensions
D K b
100% MATTE TIN
WAFER LOT NUMBER
E2
E
DATE CODE (YEAR/WEEK)
L
COUNTRY OF ORIGIN (IF OTHER THAN USA)
DIE
D2
Ordering Information
Part Number for Ordering
CDQ6004-QS-0G00 CDQ6004-QS-0G0T PB-CDQ6004-QS-00A0 PB-CDQ6004-QS-00B0 PB-CDQ6004-QS-00C0
A A3 A2 b K D E e D2 E2 L
MIN 0.80 0 0.25 0.20
2.50 2.50 0.35
NOM 0.90 0.20 REF 0.65 0.30 4.00 BSC 4.00 BSC 0.65 2.65 2.65 0.40
MAX 1.00 1.00 0.35 -
A2
A3
A
2.80 2.80 0.45
Description
Matte Tin plated RoHS compliant QFN4x4 16L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN4x4 16L surface mount package in tape and reel CDQ6004-QS Evaluation Board @ 900 MHz CDQ6004-QS Evaluation Board @ 1.9 GHz~2.1 GHz CDQ6004-QS Evaluation Board @ 2.4 GHz
We also offer this product with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 9 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
e
0.05-4.0 GHz Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes.
Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter "G" will be used in the part number for
Matte Tin finished RoHSCompliant components and "L" will be used in the part number of NiPdAu finished RoHS Compliant components in the second position of the part number suffix, as shown below: Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts For those customers not making the change at this time, Mimix/Celeritek will maintain production of current configurations. For questions and comments e-mail: ourearth@mimixbroadband.com.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 10 of 10
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.

▲Up To Search▲

Price & Availability of CDQ6004-QS

	To Download CDQ6004-QS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .